F-ZJHM Stainless Steel Sleeve Control Valve
F-ZJHM Stainless Steel Sleeve Control Valve
Stainless Steel Sleeve Control Valve uses a cage-guided sleeve trim to stabilize flow and reduce noise under high pressure; its CF8M stainless steel body resists corrosion and extends service life; this design improves accuracy, lowers cavitation, and cuts maintenance costs, verified by IEC 60534 and API 598 testing for reliability and leak-tightness.
| Boyut Aralığı | DN15–DN300 (1/2″–12″) |
| Çalışma Basıncı Aralığı: | ASME Class 150/300/600 (PN16–PN100) |
| Çalışma Sıcaklık Aralığı: | : -10°C to 200°C (PTFE/soft seat); -29°C to 425°C (graphite/metal seat) |
| Gövde Malzemesi: | CF8M (ASTM A351 316/316L Stainless Steel) |
| Bağlantı Türü: | Raised-Face Flanged, ASME B16.5 (EN 1092-1 on request) |
| Uygulanabilir Ortam: | Liquids, gases, and steam (including mildly corrosive service) |
| Aktüatör Türü: | Pneumatic diaphragm, spring-return with electro-pneumatic positioner (4–20 mA) |
| Gerilim Seçenekleri | 24 VDC, 110 VAC, 220 VAC (for positioner/solenoid/limits) |
| Tasarım Standardı | IEC 60534; ASME B16.34 |
| Test Standardı | API 598 (body/seat); IEC 60534-4 (performance) |
| Yangına Dayanıklı Tasarım | Not standard/applicable for globe control valves |
| Sertifikasyon | CE / RoHS / ISO 9001 / IP65 (Aktüatör) |
| Özelleştirme | Yukarıda standart parametre örnekleri yer almaktadır. Özel parametreleriniz ve malzemeleriniz varsa, bunların hepsini size göre uyarlayabiliriz. |
| Series | AT | AW | Linear | Pneumatic Cylinder | Hijyenik |
|---|---|---|---|---|---|
| Valf Gövdesi | Ball valve, butterfly valve, plug valve | Gate valve, Global valve | Knife gate valve | Sanitary butterfly valve | |
| Function | Double Acting, Single Acting (Failure Resetting FO or FC) | ||||
| Kontrol Aksesuarları |
• Solenoid Valve, Filter Regulator Lubricator (F.R.L.), Positioner, Limit Switch, Handwheel • Solenoid Valve & Positioner are with Explosion-proof grade and Signal Feedback type for choice | ||||
| Operating Medium |
Clean and dry or lubricated air or inert gas. Any non-corrosive gas that is compatible with the internal parts of the actuator and the lubricant. The dew point temperature of the operating medium is -20°C, and the size of impurity particles is no more than 30u. When selecting a positioner, the impurity particle size should be no more than 5u. | ||||
| Air Source Pressure | 3bar to 8bar | ||||
| Operating Environment Temperature |
• Standard type: -20°C to +80°C • Low-temperature type: -40°C to +80°C • High-temperature type: -20°C to +160°C | ||||
| Lubrication |
Under normal operating conditions, the standard type does not require additional lubricant. For low-temperature or high-temperature environments, special lubricants are required. | ||||
Endüstriyel Vana Uygulamaları için Sertifikalı Kalite
Fleyenda vanaları ve elektrikli aktüatörleri, istikrarlı performans, güvenilir çalışma ve uzun vadeli endüstriyel kullanım için üretilmiştir. Sertifikalı kalite desteği sayesinde, su arıtma, kimyasal işleme, otomasyon ve endüstriyel proses kontrol sistemleri için uygundur.
80% Kullanıcılarının İlgisini Çeken Sık Sorulan Sorular
1.What factors should be checked when sizing a Stainless Steel Sleeve Control Valve for high-pressure service?
• Confirm valve pressure drop and flow range suit the process conditions.
• Use sleeve-guided trim to handle large differential pressures with stability.
• Match actuator and positioner size to the valve’s flow capacity.
• Choose the right flow characteristic—linear or equal-percentage—to optimize control.
2.How to ensure reliable operation of a corrosion-resistant sleeve control valve in harsh media?
• Verify 316/316L stainless steel body and trim for chemical compatibility.
• Select proper packing—PTFE for moderate, graphite for high-temperature service.
• Use hardened seats for erosion resistance under abrasive or hot flow.
• Schedule regular inspection of sleeve and plug surfaces for wear.
3.What installation steps improve performance of a flanged stainless sleeve valve in automation systems?
• Maintain straight pipeline runs to reduce turbulence.
• Calibrate actuator stroke and positioner response before startup.
• Verify 4–20 mA signal accuracy with control system feedback.
• Test valve performance under operating flow to confirm stability.
4.How to reduce noise or vibration in a high-pressure control valve?
• Keep pressure drop within the valve’s rated ΔP limit.
• Install anti-cavitation sleeve trim for flashing or erosive conditions.
• Inspect downstream piping for restrictions that amplify turbulence.
• Adjust actuator tuning to prevent hunting in control loops.