FAT-Q-G Pneumatic High-Pressure 2-Ways Ball Valves
FAT-Q-G Pneumatic High-Pressure 2-Ways Ball Valves
The Pneumatic High-Pressure 2-Way Ball Valve uses a stainless-steel body and rack-and-pinion actuator for reliable shut-off under 1000 PSI, delivering fast automation and safe flow control—tested to API 598 and certified CE / RoHS / ISO 9001 for proven performance.
| Boyut Aralığı | 1/4″–4″ (DN8–DN100) |
| Çalışma Basıncı Aralığı: | Up to 1000 PSI (69 Bar) |
| Çalışma Sıcaklık Aralığı: | –20°C to +180°C |
| Gövde Malzemesi: | CF8M / SS316 Stainless Steel |
| Bağlantı Türü: | Threaded (BSPP, NPT, BSPT) or Flanged (DIN / ANSI / JIS) |
| Uygulanabilir Ortam: | Air, Water, Oil, Gas, Steam, Corrosive Fluids |
| Aktüatör Türü: | Rack and Pinion Pneumatic Actuator |
| Gerilim Seçenekleri | 24 V DC, 110 V AC, 220 V AC |
| Tasarım Standardı | ISO 5211, ASME B16.34, API 608 |
| Test Standardı | API 598, EN 12266-1 |
| Yangına Dayanıklı Tasarım | API 607 / API 6FA (Optional) |
| Sertifikasyon | CE / RoHS / ISO 9001 / IP65 (Aktüatör) |
| Özelleştirme | Yukarıda standart parametre örnekleri yer almaktadır. Özel parametreleriniz ve malzemeleriniz varsa, bunların hepsini size göre uyarlayabiliriz. |
| Series | AT | AW | Linear | Pneumatic Cylinder | Hijyenik |
|---|---|---|---|---|---|
| Valf Gövdesi | Ball valve, butterfly valve, plug valve | Gate valve, Global valve | Knife gate valve | Sanitary butterfly valve | |
| Function | Double Acting, Single Acting (Failure Resetting FO or FC) | ||||
| Kontrol Aksesuarları |
• Solenoid Valve, Filter Regulator Lubricator (F.R.L.), Positioner, Limit Switch, Handwheel • Solenoid Valve & Positioner are with Explosion-proof grade and Signal Feedback type for choice | ||||
| Operating Medium |
Clean and dry or lubricated air or inert gas. Any non-corrosive gas that is compatible with the internal parts of the actuator and the lubricant. The dew point temperature of the operating medium is -20°C, and the size of impurity particles is no more than 30u. When selecting a positioner, the impurity particle size should be no more than 5u. | ||||
| Air Source Pressure | 3bar to 8bar | ||||
| Operating Environment Temperature |
• Standard type: -20°C to +80°C • Low-temperature type: -40°C to +80°C • High-temperature type: -20°C to +160°C | ||||
| Lubrication |
Under normal operating conditions, the standard type does not require additional lubricant. For low-temperature or high-temperature environments, special lubricants are required. | ||||
Endüstriyel Vana Uygulamaları için Sertifikalı Kalite
Fleyenda vanaları ve elektrikli aktüatörleri, istikrarlı performans, güvenilir çalışma ve uzun vadeli endüstriyel kullanım için üretilmiştir. Sertifikalı kalite desteği sayesinde, su arıtma, kimyasal işleme, otomasyon ve endüstriyel proses kontrol sistemleri için uygundur.
80% Kullanıcılarının İlgisini Çeken Sık Sorulan Sorular
1. What key factors should I evaluate when choosing the Pneumatic High-Pressure 2-Way Ball Valve for critical pipeline control?
• Confirm pressure and flow rating to match system demand.
• Select actuator type and torque suitable for full pressure operation.
• Match connection type and bore design to existing piping.
• Verify compliance with API 598, EN 12266 or ISO 5211 standards.
2. How does automation improve performance in industrial applications?
• Air-actuated high-pressure ball valve enables remote on/off control via PLC or SCADA.
• Fast quarter-turn motion ensures reliable shut-off under high pressure.
• ISO 5211 mounting allows actuator interchangeability.
• Pneumatic operation performs safely in heat or explosive environments.
3. Can the Pneumatic High-Pressure 2-Way Ball Valve handle corrosive or extreme media?
• Stainless-steel body and PTFE or PEEK seats resist chemical corrosion.
• Full-port design minimizes pressure loss in viscous or high-pressure flow.
• Actuator and mounting are rated for –20 °C to +200 °C conditions.
• Reinforced seals reduce wear and prevent leakage during cycling.
4. What installation or maintenance issues should be addressed?
• Maintain proper air supply pressure for full actuator stroke.
• Align actuator and valve mounting to avoid stem wear.
• Inspect seats and seals regularly in high-pressure service.
• Apply correct torque and gasket material for threaded or flanged joints.