FAT-Q-3PS Pneumatic 3-Piece Ball Valve
FAT-Q-3PS Pneumatic 3-Piece Ball Valve
The Pneumatic 3-Piece Ball Valve uses a stainless-steel three-body design for zero leakage and easy in-line maintenance, ensuring reliable flow control, reduced downtime, and lower costs, proven by ISO 5211 mounting, API 598 pressure tests, and API 607 fire-safe certification under 6.4 MPa and 250 °C conditions.
| Size Range | 1/2” – 4” (DN15 – DN100) | |||||
| Working Pressure Range: | 1.6 MPa – 6.4 MPa (PN16 – PN64) / Class 150–300 | |||||
| Working Temperature Range: | −20°C to +180°C (PTFE Seat), up to +250°C (RPTFE/PPL Seat) | |||||
| Body Material: | Stainless Steel CF8 / CF8M (AISI 304 / 316) | |||||
| Connection Type: | Threaded (BSP/NPT), Socket Weld, Butt Weld, Flanged (ANSI/DIN) | |||||
| Applicable Medium: | Air, Water, Steam, Oil, Gas, Weak Acid & Alkali | |||||
| نوع المشغل: | Double Acting or Spring Return Pneumatic Actuator | |||||
| خيارات الجهد الكهربائي | 24V DC, 110V AC, 220V AC (via Solenoid Control) | |||||
| معايير التصميم | ASME B16.34 / ISO 5211 / DIN 3357 | |||||
| معيار الاختبار | API 598 / EN 12266-1 | |||||
| تصميم مقاوم للحريق | API 607 / ISO 10497 (Optional) | |||||
| الشهادة | CE / RoHS / ISO 9001 / IP65 (المشغل) | |||||
| التخصيص | ما ورد أعلاه عبارة عن أمثلة للمعلمات القياسية. إذا كانت لديك معلمات ومواد محددة، فيمكننا تخصيصها جميعًا. | |||||
| Actuator Model | Standard Time/Torque | Optional Time/Torque | Rotation Angle Range | Actuator Weight | Power Supply | Optional Control Circuit |
|---|---|---|---|---|---|---|
| FLE-105 | 25S/50Nm | 4S/20Nm 10S/30Nm | 0-90° Adjustable | 2.2kg | DC24V AC24V AC110V AC220V AC380V | A type B type C type D type E type F type |
| FLE-110 | 25S/100Nm | 15S/50Nm | 5.1kg | |||
| FLE-116 | 25S/160Nm | 15S/80Nm | 5.1kg | |||
| FLE-120 | 25S/200Nm | 15S/100Nm | 7.5kg | |||
| FLE-140 | 25S/400Nm | 15S/200Nm | 7.5kg | |||
| FLE-160 | 25S/600Nm | 15S/300Nm | 8.1kg | |||
| FLE-1100 | 50S/1000Nm | 25S/500Nm | 12.7kg | |||
| FLE-1200 | 50S/2000Nm | 25S/1000Nm | 12.7kg | |||
| Type | ON/OFF, Regulating, Intelligent | |||||
| Insulation Resistance | 100MΩ/500VDC | |||||
| Dielectric Strength | 1500V AC 1min. | |||||
| Level of Protection | IP67 (IP68 optional) | |||||
| Installed Location | 360° Installation at any Angle | |||||
| Electrical Interface | 2-G1/2 Metal Fitting, the corresponding metal cable joints should be installed according to the selected cables | |||||
| Ambient temperature | -20°C to +60°C | |||||
| Optional Explosion Proof | Ex d II BT4 / CT4 / CT6 Gb | |||||
| Power-loss reset (fail-safe) function | Fail-open, Fail-closed or No-reset (factory-selectable) | |||||
| Optional functions | Overtorque protection, dehumidification heater, passive contact switch, operating handwheel | |||||
جودة معتمدة لتطبيقات الصمامات الصناعية
صُممت صمامات ومشغلات كهربائية «فلييندا» لتوفير أداء مستقر، وتشغيل موثوق، واستخدام صناعي طويل الأمد. وبفضل الدعم المعتمد في مجال الجودة، فهي مناسبة لمعالجة المياه، والمعالجة الكيميائية، والأتمتة، وأنظمة التحكم في العمليات الصناعية.
الأسئلة الشائعة التي تهم مستخدمي طراز 80%
1. What air pressure is required for a Pneumatic 3-Piece Ball Valve in automated systems?
• Standard air supply ranges from 5.5–8.3 bar to ensure full actuation.
• Lower pressure causes slow response or incomplete closure.
• Check actuator torque curve when sizing for high-cycle operation.
• Use clean, regulated air with moisture and oil filters to extend service life.
2. How to install a Pneumatic 3-Piece Ball Valve for efficient maintenance?
• The three-body design allows in-line service without removing end-caps.
• Align ISO 5211 mounting pad for accurate actuator installation.
• Keep valve cavity clean of weld slag and debris before startup.
• Cycle the actuator after installation to confirm smooth operation.
3. Which media are suitable for a Pneumatic 3-Piece Ball Valve?
• Handles water, oil, gas, steam, and mild chemicals.
• For corrosive or high-temperature fluids, use upgraded seats and trims.
• Sanitary and vacuum versions are available for food or biotech systems.
• Rated up to 1000 psi and −20 °C to +200 °C depending on configuration.
4. What are the advantages of a Pneumatic 3-Piece Ball Valve over a manual valve?
• Enables remote, fast, and repeatable operation with minimal labor.
• In-line maintenance reduces downtime and replacement costs.
• Full-bore design minimizes pressure loss and saves energy.
• High-cycle durability lowers total cost of ownership.